Pipe clamp has the following advantages
1. Because the closed-cell structure of PIR cold-keeping pipe support is better than ordinary polyurethane pipe support during use.
2. The tube holder of polyurethane raw material is much lighter than the tube holder of other raw materials.
3. PIR cold-proof tube holder has high compressive strength
PIR cold-retaining pipe support is based on the traditional molded polyurethane pipe support and has been improved by technological innovation. Then it has reached the new thermal insulation material with flame retardant effect. The PIR cold-proof pipe support not only has the traditional polyurethane pipe support. The thermal conductivity is small, the thermal insulation effect is good, the raw materials are light and so on, and the improvement is made up to make up for the short board of the traditional polyurethane tube tray, and the production cost is much lower than the same type of flame retardant materials on the market. It is the ambition insulation material for the production profession.
Let's take a look at the differences between U-tube clamps and flat steel clamps.
U-shaped pipe clamps are generally used for fixing (two bolts in the lower part), and can also be used for sliding (one on the bolt and two on the bottom), and the gap is adjusted by adjustment.
Flat steel pipe clamps are generally used for sliding, mainly with gaskets. There is a gap between the pipe and the pipe after installation.
U-shaped pipe clamps are suitable for places where the space is relatively narrow and the pipe racks share more pipelines.