新闻中心

News

Product

Contact

Jiangsu Oubang Pipe Clamp Manufacturing Co., Ltd.

Contact:  Porco

222.png 333.jpg 5555.png

Email : obpipeclamp@qq.com

Skype/WhatsApp/Wechat/mob

+86 183 6168 0199

Tel/Fax : 86 515 87226455

Address : No. 13, Yaoqiao 1st Road, SME Park, Funing County, Yancheng City


What is the installation procedure for the double pipe clamp?

Your current location: Home >> News >> Industry News

What is the installation procedure for the double pipe clamp?

Date:2017-06-20 Author:Jiangsu Oubang Pipe Clamp Manufacturing Co., Ltd. Click:

First, the pipe clamp application range

The light pipe clamp is applied to common mechanical pressure pipes of 6 size series, and the outer diameter of the pipe is 6-57mm.

Double pipe clamps are used in five sizes of mechanical pressure pipes with an outer diameter of 6-42 mm.

Heavy duty pipe clamps are used in 8 series of high mechanical pressure pipes with an outer diameter of 8-273mm.

Second, the pipe clamp material characteristics

Density, flexural strength, impact toughness, compressive strength, modulus of elasticity, tensile strength, temperature resistance, color.

Third, the classification of water pipes and other pipe clamps:

1. According to the shape, full round heavy pipe clamp, full round light pipe clamp, long head half pipe clamp, short head half pipe clamp, rotating pipe clamp, rotating felt pipe clamp, J pipe clamp and so on. According to the classification of Dalian Vodafone Pipeline Connection Technology Co., Ltd.

2. According to the material, plastic ABS pipe clamp, aluminum alloy pipe clamp, stainless steel pipe clamp, carbon steel pipe clamp and so on. Classified according to common materials in the market.

Fourth, the pipe clamp installation program

Before assembling on the welding plate, in order to better determine the direction of the clamp, it is recommended to mark the fixed position first, then weld it, insert the lower part of the pipe body, and place the pipe to be fixed. Then put the other half of the tube body and cover and tighten with screws. Do not directly solder the bottom plate of the pipe clamp.

On the grounding rail, the rail can be welded to the foundation or fixed with screws. Then push the rail nut into the rail and turn it 90 degrees. Insert the lower half of the tube into the nut, put the tube to be fixed, and then put it. The upper half of the tube body and cover are fixed with screws.

Stack the assembly, the guide rail can be welded on the foundation, or fixed with screws. First install the upper and lower half of the pipe body, put the pipe to be fixed and put the upper half of the pipe body, fix it with screws, and pass the anti-loose cover. Prevent it from turning. Then install the second pipe clamp in the same way as above.

When assembling the elbow, when assembling the elbow, it should be fixed directly at the front and rear of the elbow with the Yongsheng pipe clamp. It is recommended that such a support point be a fixed position.

Url:http://en.jsobgj.com/news/371.html

Tag:Lightpipeclamp

Browse:

Share 一键分享